Архив

Issue 4 (20), 2020

Dolmatov V.Yu., Burkat G.K., Safronova I.V., Vehanen A., Myllymäki V., Marchukov V.A., Almazova N.S., Litovka Yu.V., Dyakov I.A. The Study of Obtaining Composite Nickel Electroplatings with Detonation Nanodiamonds and Diamond Charge
DOI: 10.17277/amt.2020.04.pp.003-011

3

Zhidovich A.O., Stolin A.M., Bazhin P.M., Konstantinov A.S., Chizhikov A.P. Making Ceramic Protective Coatings on Titanium Boride Base by Electric Arc Surfacing with SHS Electrodes in an Argon Atmosphere
DOI: 10.17277/amt.2020.03.pp.012-016

12

Markov M.A., Fadin Yu.A., Kravchenko I.N., Galinovsky A.L., Belyakov A.N., Bykova A.D. A Method for Determining Wear Resistance and Wear Depth of Thin-Layer Functional Coatings
DOI: 10.17277/amt.2020.03.pp.018-024

17 

Mkrtchyan E.S., Neskoromnaya E.A., Burakova I.V., Ananyeva O.A., Revyakina N.A., Babkin A.V., Kuznetsova T.S., Kurnosov D.A., Burakov A.E. Comparative Analysis of the Adsorption Kinetics of the Methylene Blue Dye on Graphene Aerogel and Activated Coconut Carbon
DOI: 10.17277/amt.2020.03.pp.025-032

21 

Trofimov V.S., Petrov E.V. Three Important Refinements of the Condensed Matter Detonation Theory
DOI: 10.17277/amt.2020.03.pp.033-042

30 

Kuznetsov Yu.A., Kravchenko I.N., Galinovsky A.L., Yakovlev D.D., Makarov I.D. Improving Durability of Electric Motor Bearing Shields Using Combined Technology
DOI: 10.17277/amt.2020.03.pp.043-046

34

Yartsev V.P., Kiseleva O.A. The Influence of Composition and Structure on the Performance Properties of Wood Composites
DOI: 10.17277/amt.2020.03.pp.047-055

41 

Buniatyan V.V., Dashtoyan H.R., Davtyan A.A. The I–V Characteristics of M–BaxSr1–xTiO3–M Thin Film Structures with Oxygen Vacancies. Part 2
DOI: 10.17277/amt.2020.03.pp.056-063

58

 

Al-Busaidi S.S.S., Ponomarev S.V. Analytical and Procedural Decision-Making Models for Process Improvement Projects in Testing Laboratories
DOI: 10.17277/amt.2020.03.pp.064-067

67

Abstracts in Russian

76

 

Issue 3 (19), 2020

Levinsky Yu.V., Alymov M.M., Rokhlin L.L. The p–T–x-State Diagram of the Mg–Ni System
DOI: 10.17277/amt.2020.03.pp.003-079

3

Vityaz P.A., Senyut V.T., Kheifets M.L., Kolmakov A.G., Klimenko S.A. Synthesis of Superhard Materials Based on Sphalerite Boron Nitride Using Carbon Nanoparticles as a Phase Conversion Catalyst
DOI: 10.17277/amt.2020.03.pp.008-018

8

Kolosko A.G., Chernova V.S., Filippov S.V., Popov E.O. Method for Recording and Reproducing an Experimental Research into the Field Emitter Properties Based on Carbon Nanotubes
DOI: 10.17277/amt.2020.03.pp.018-024

18 

Popova A.A., Aliev R.E., Shubin I.N. Features of Nanoporous Carbon Material Synthesis
DOI: 10.17277/amt.2020.03.pp.025-032

25 

Zdanovich A.A., Matsko M.A., Melezhik A.V., Tkachev A.G., Zakharov V.A. Preparation of Composite Materials Containing Polyethylene and Carbon Nanotubes by in situ Ethylene Polymerization over Titanium-Magnesium Catalyst Fixed on the Surface of Carbon Nanotubes
DOI: 10.17277/amt.2020.03.pp.033-042

33 

Tkachev A.G., Memetov N.R., Stolyarov R.A., Chapaksov N.A., Gerasimova A.V., Yagubov V.S., Matveentsev A.V., Bulgakova V.G., Pozdnyakova S.A. Electromagnetic Properties of Cold-Cure Silicone Mixtures Containing Multi-Walled Carbon Nanotubes
DOI: 10.17277/amt.2020.03.pp.043-046

43

Dolgunin V.N., Ivanov O.O., Akopyan S.A. Quasithermal Effects During Rapid Gravity Flow of a Granular Medium
DOI: 10.17277/amt.2020.03.pp.047-055

47 

Nasraoui M., Litovka Yu.V., Dolmatov V.Yu. The Effect of Combinations of Carbon Nanomaterials on the Microhardness of the Chromium Galvanic Coating
DOI: 10.17277/amt.2020.03.pp.056-063 

56

 

Konstantinov A.S., Antipov M.S., Bazhin P.M., Stolin A.M. Regularities of the Effect of Process Parameters of SHS-Extrusion on the Structure and Properties of Long-Dimensional Rods from TiB / 30 wt. % Ti Materials
DOI: 10.17277/amt.2020.03.pp.064-067

64

Kyaw Myo Htet, Glotova M.P., Galinovsky A.L. Innovative Research of Ultra-Jet Dispersion and Suspension Technologies for Processing and Modifying Liquids
DOI: 10.17277/amt.2020.03.pp.068-075

68

Abstracts in Russian

76

 

Issue 2 (18), 2020

Turganov Z.T., Stolin A.M., Bazhin P.M., Averichev O.A. Structural Features of the Refractory Powder Materials Based on Titanium Carbide Obtained by SHS-Grinding
DOI: 10.17277/amt.2020.02.pp.003-009

3

Mun E.A., Zhaisanbayeva B.A. The Role of Nanoparticle PEGylation in Drug Delivery
DOI: 10.17277/amt.2020.02.pp.010-018

10

Pushina E.A., Karaeva A.R., Solomonik I.G., Urvanov S.А., Mordkovich V.Z. Investigation of  Structural and Physical Properties of Composite Catalyst Support with Exfoliated Graphite Additive
DOI: 10.17277/amt.2020.02.pp.019-024

19 

Melezhik A.V., Zelenin A.D., Alekhina O.V., Memetov N.R., Tkachev A.G. The Synthesis of Microporous Carbon in the Furfural–Hydroquinone–Urotropin System
DOI: 10.17277/amt.2020.02.pp.025-032

25 

Desyatov A.V., Chaika M.Yu., Besedin V.V., Bulavina E.V., Denisenko A.V., Shibanov N.A. Increasing of a Lithium-Ion Supercapacitor Specific Energy by Introducing LiNi1/3Mn1/3Co1/3O2 Additive into the Active Carbon-Based Cathode Material
DOI: 10.17277/amt.2020.02.pp.033-039

33 

Konkova T.V., Rysev A.P., Trinh Nguyen Quynh. The Kinetics of Sorption Extraction of Lanthanum and Aluminum Cations from a Phosphoric Acid Solution by Sulfocathionite
DOI: 10.17277/amt.2020.02.pp.040-045

40

Mashhadani A., Pershin V. Concrete Modification Using Graphene and Graphene Oxide
DOI: 10.17277/amt.2020.02.pp.046-056

46 

Nagornov S.A., Kornev A.Yu., Romantzova S.V. Improving the Three-Component Mixed Motor Fuel Manufacturing Process
DOI: 10.17277/amt.2020.02.pp.057-065 

57

 

Shchegolkov Aleksei V., Tugolukov E.N., Shchegolkov Alexandr V. Overview of Electrochromic Materials and Devices: Scope and Development Prospects
DOI: 10.17277/amt.2020.02.pp.066-073

66

Information. Events. Facts

74
Abstracts in Russian

75

 

Issue 1 (17), 2020

Levinsky Yu.V., Alymov M.I., Rohlin L.L. The p–T–x Phase Diagram of the Cu–Mg System
DOI: 10.17277/amt.2020.01.pp.003-007

3

Buniatyan V.V., Dashtoyan H.R. The I–V Characteristics of M–BaxSr1–xTiO3–M Thin Film Structures with Oxygen Vacancies. Part 1
DOI: 10.17277/amt.2020.01.pp.008-017

8

Ali J. Ali, Tugolukov E.N., Habeeb L.J. Thermophysical Properties of Nanomodified Liquids
DOI: 10.17277/amt.2020.01.pp.018-026

18 

Vermel V.D., Bolsunovsky S.A., Leontyeva Yu.O. The Effect of Finishing Milling Parameters on the Physico-Mechanical Properties of the Structural Steel Surface Layer of Aircraft Parts
DOI: 10.17277/amt.2020.01.pp.027-035

27 

Mailybayev E., Umbetov U., Seitmuratov A., Shynykulova A. Analysis of Oscillatory Processes in Elastic and Viscoelastic Media and Structural Elements to Predict Equipment Shutdown
DOI: 10.17277/amt.2020.01.pp.036-042

36 

Pankov S.Yu., Kalinin Yu.E., Makagonov V.A., Zhilova O.V., Chetverikova A.P., Kashirin M.A., Foshin V.A. The Structure and Electrical Properties of (In2O3/SiO2)25 Thin Films
DOI: 10.17277/amt.2020.01.pp.043-048

43

Barshutina M.N., Musienko P.E., Tkachev A.G. Modeling of Elastic Modulus of CNT/Silicone Composites Designed for Medical Applications
DOI: 10.17277/amt.2020.01.pp.049-053

49 

Akulinin E.I., Golubyatnikov O.O., Dvoretsky D.S., Dvoretsky S.I. Optimal Characteristics Calculation of the Air Chemical Regeneration System of Sealed Habitable Objects
DOI: 10.17277/amt.2020.01.pp.054-063 

54

 

Garipov R.R., Khantimerov S.M., Suleimanov N.M. Investigation of the Carbon Nanotubes Functionalization Effect on the Composite Material Conductive Properties
DOI: 10.17277/amt.2020.01.pp.064-067

64

Memetov N.R., Gerasimova A.V., Stolyarov R.A., Tkachev A.G., Melezhik A.V., Chapaksov N.A., Osipkov A.S., Mikhalev P.A., Provatorov A.S. Composite Materials Based on Foam Polyurethane and Graphene Nanoplates Effectively Screening Electromagnetic Radiation
DOI: 10.17277/amt.2020.01.pp.068-073

68

Abstracts in Russian

74

 

Issue 4 (16), 2019

Ali I., Burakov A.E., Melezhik A.V., Babkin A.V., Burakova I.V., Neskomornaya E.A., Galunin E.V., Tkachev A.G. Uptake of Pb(II) Metal Ion in Water Using Polyhydroquinone/Graphene Nanocomposite Material: Kinetics, Thermodynamics and Mechanism Studies
DOI: 10.17277/amt.2019.04.pp.003-012

3

Valitov V.A. Microduplex Type Structure Formation Mechanism During Thermomechanical Treatment of Superalloy
DOI: 10.17277/amt.2019.04.pp.013-026

13

Gerasimova A.V., Bustamante A., García L., Melezhik A.V., Tkachev A.G. and Iniesta J. Fabrication and Characterization of Anionic Exchange Membranes Based on Chitosan/Poly (Vinyl) Alcohol and Chitosan/Chondroitin Doped with an Amino Cumulene Derivative and Carbon Nanotubes
DOI: 10.17277/amt.2019.04.pp.027-034

27 

Yartsev V.P., Kiseleva O.A. Prediction of the Building Materials Performance in Products and Structures
DOI: 10.17277/amt.2019.04.pp.035-051

35 

Sldozian R.J., Mikhaleva Z.A., Tkachev A.G. The Multi-Walled Carbon Nanotubes Effect on the Physical-Mechanical Characteristics of Lightweight Concrete
DOI: 10.17277/amt.2019.04.pp.052-057

52 

Aung W.M., Marchenko M.V., Troshkina I.D., Burakova I.V., Gutnik I.V., Burakov A.E., Tkachev A.G. Scandium Adsorption from Sulfuric-Chloride Solutions by Nanocomposite PANI/CNTs
DOI: 10.17277/amt.2019.04.pp.058-065

58

Popova A.A., Shubin I.N., Tarov D.V. Modeling of Mixing Nanopowder Materials when Designing Process Equipment
DOI: 10.17277/amt.2019.04.pp.066-074

66 
Abstracts in Russian 75 

 

Issue 3 (15), 2019

Levinsky Yu.V., Rokhlin L.L., Alymov M.I. The Structural Diagram of the Al–Mg System in Pressure–Temperature–Composition Coordinates
DOI: 10.17277/amt.2019.03.pp.003-007

3

Samoilov V.M., Samsonova V.B., Nakhodnova A.V., Vetbets D.B., Gareev A.R., Bubnenkov I.A., Steparyova N.N., Shvetsov A.A., Bardin N.G. Raman Spectroscopy and Crystalline Structure of Polyacrylonitrile-Based Carbon Fibres
DOI: 10.17277/amt.2019.03.pp.008-015

8

Yagubov V.S., Shchegolkov A.V., Tkachev A.G. Materials for Electric Heaters Used in Motor Vehicles: Existing Technologies and Development Prospects
DOI: 10.17277/amt.2019.03.pp.016-025

16 

Vityaz P.A., Kheifets M.L., Senyut V.T., Kolmakov A.G., Klimenko S.A. Multifractal Parametrization in the Process of Diamond Nanostructured Composites Formation at High Pressures and Temperatures
DOI: 10.17277/amt.2019.03.pp.026-040

26 

Bohlooly Mehdi, Plotnikova S.V., Kouchakzadeh Mohammad Ali, Kulikov G.M. Three Dimensional Stress Analysis of Plates Using Assumed Natural Strain Method and Sampling Surfaces Method Applied to the Four-Node Quadrilateral Plate Element
DOI: 10.17277/amt.2019.03.pp.041-049

41 

Mishchenko S.V., Mordasov M.M., Savenkov A.P., Safonova M.E., Sychev V.A. Determination of the Sensitivity of a Contactless Device for Measuring Viscosity to Influencing Quantities by Measurement Model
DOI: 10.17277/amt.2019.02.pp.050-055

50 

Akulinin E.I., Golubyatnikov O.O., Dvoretsky D.S., Dvoretsky S.I. A Numerical Study of Heat and Mass Exchange Processes in Swing Adsorption Device for Oxygen-Enriched Air
DOI: 10.17277/amt.2019.03.pp.056-055

56 

Ponomarev S.V., Bulanova V.O., Bulanov E.V., Divin A.G. Optimization of the Linear Pulsed Heat Source Method and Basic Structural Dimensions of the Device for Measuring Thermophysical Properties of Solid Materials to Improve the Laboratory Management System
DOI: 10.17277/amt.2019.03.pp.066-079

66 
Abstracts in Russian 80 

 

Issue 2, 2019

Aldushin A.P. Macrokinetic Analysis of Refractory Compound Synthesis Using the Electro-Thermal Explosion Method
DOI: 10.17277/amt.2019.02.pp.003-007

3

Kheifetz M.L., Vasilyev A.S., Klimenko S.A. Technological Control of the Heredity of Operational Quality Parameters for Machine Parts
DOI: 10.17277/amt.2019.02.pp.008-018

8

Melezhik A.V., Smolsky G.V., Zelenin A.D., Neskoromnaya E.A., Alekhina O.V., Burakov A.E., Tkachev A.G. Synthesis of Carbon Materials with Abnormally High Specific Surface Area
DOI: 10.17277/amt.2019.02.pp.019-024 

19 

Shchegolkov A.V., Verma Rama S., Ramakrishna Seeram, Borovskikh P.O. Nanomodified Heat-Accumulating Materials with Controlled Thermophysical Characteristics
DOI: 10.17277/amt.2019.02.pp.025-031

25 

Vorobyov Yu.V., Baronin G.S., Dunaev A.V., Stavrev D., Dimitrov D., Dimitrov R., Voronin N.V., Vorobyov Yu.Yu., Kuznetsov G.P., Assovskiy I.G. Unique and Stable Water-Fuel Emulsions
DOI: 10.17277/amt.2019.02.pp.032-040

32 

Zagorodnikova M.A., Yartsev V.P., Rupyshev V.G. Strength and Durability of Roofing PVC Membranes in the Conditions of Climate Impacts
DOI: 10.17277/amt.2019.01.pp.041-047

41 

Mokrozub V.G., Malygin E.N. Development of Decision-Making Support Systems to Design Chemical Process Equipment for Batch Production
DOI: 10.17277/amt.2019.02.pp.048-058

48 

Zhumagaliyeva G.B., Pershin V.F. Production of Few-Layer Graphene in Synthetic Oil Using a Rod Drum Mill
DOI: 10.17277/amt.2019.02.pp.059-068

59 

Alekseev S.Yu. Architectural Design of Software Systems Implementing Models of Process Equipment
DOI: 10.17277/amt.2019.02.pp.069-080

69 
Abstracts in Russian 81 

 

Issue 1, 2019

Semenov A.B., Fomina O.N., Muranov A.N., Kutsbakh A.A., Semenov B.I. The Modern Market of Blank Productions in Mechanical Engineering and the Problem of Standardization of New Materials  and Technological Processes
DOI: 10.17277/amt.2019.01.pp.003-011

3

Kheifetz M.L., Prement G.B., Gretsky N.L. Technological Control of the Heredity of Operational Quality Parameters in the Engine Camshaft Recovery
DOI: 10.17277/amt.2019.01.pp.012-020

12

Abramov G.V., Gavrilov A.N. Modeling of Carbon Nanostructures Synthesis in Low-Temperature Plasma
DOI: 10.17277/amt.2019.01.pp.021-034 

21 

Buniatyan V., Begoyan V., Davtyan A., Hovnikyan H., Avetisyan P. C–V (g–V) Characteristics of M–BaxSr1 – xTiO3–M Thin Film Structures with Oxygen Vacancies
DOI: 10.17277/amt.2019.01.pp.035-044

35 

Karmanova O.V., Moskalev A.S., Tikhomirov S.G., Shutilin Yu.F. The Composition and Technological Aspects of Obtaining Water-Swelling Elastomeric Materials
DOI: 10.17277/amt.2019.01.pp.045-048

45 

Shchukin А.S., Sytschev А.Е., Vrel D.  Peculiarities of the Mo/NiAl Interface Formed by SHS
DOI: 10.17277/amt.2019.01.pp.049-054

49 

Matveykin V.G., Akulinin E.I., Posternak N.V., Skvortsov S.A., Dvoretsky S.I. The Study of Cyclic Adsorption Air Separation and Oxygen Concentration Processes
DOI: 10.17277/amt.2019.01.pp.055-072

55 

Yartsev V.P., Nikolyukin A.N., Pluzhnikov T.M. Modeling Adhesive Strength of Corroded Rods in Reinforced Concrete Structural Elements Using a Genetic Algorithm
DOI: 10.17277/amt.2019.01.pp.073-081

73 

Abstracts in Russian

82 

 

Issue 4, 2018

M.I. Alymov, V.N. Sanin, O.O. Likhanova. Synthesis and Consolidation of Powder Materials – Achievements and Prospects
DOI: 10.17277/amt.2018.04.pp.003-004

3

Vermel V.D., Titov S.A., Kornev Yu.V., Semenov P.E., Nagovitsina T.Yu., Chernyshev L.L. Evaluation  of Improving Mechanical Characteristics of Epoxy Binder after Dispersing Carbon Nanofibers Using Wave Processes and Ultrasound
DOI: 10.17277/amt.2018.04.pp.005-015

5

Petrov E.V., Saikov I.V., Saikova G.R. The Study of Zinc Sulphide Produced by Different Methods of Impulse Actions
DOI: 10.17277/amt.2018.04.pp.016-018 

16

Koplak O.V., Tereshchenko A.N., Dmitriev O.S., Morgunov R.B. Spin Selective Segregation of Oxygen in Dislocation Cores in 29Si Enriched Silicon Crystals
DOI: 10.17277/amt.2018.04.pp.019-024

19

Ummay Habiba, Sheikh Manjura Hoque, Samia Islam Liba, Hasan Khaled Rouf. Magnetocaloric Effects of Barium-Strontium Ferrites for Magnetic Refrigeration System
DOI: 10.17277/amt.2018.04.pp.025-030

25

Lwin Naing Win, Sheshin E.P., Kyaw N.C., Lwin Z.Y., Hlaing W.Z. Fluctuations of the Field Emission Current of Carbon Fibers
DOI: 10.17277/amt.2018.04.pp.031-037

31

Kaputkin D.E. Investigation of Functional Properties of Corrosion-Resistant Coatings on TiNi Implants
DOI: 10.17277/amt.2018.03.pp.038-041

38

Al-Shiblawi K.A., Pershin V.F., Yartsev V.P. Modification of Epoxy Resins: Modern Condition and Prospects. Part  II.  Graphene and Graphene Oxide Modification
DOI: 10.17277/amt.2018.04.pp.042-053

42

Gutnik I.V., Dyachkova T.P., Rukhov A.V., Burakova E.A., Tugolukov E.N., Alekseev S.Yu., Kodirov B.B., Titova G.A. Polyaniline/Carbon Nanotubes Composites: Kinetic Laws of Synthesis, Morphology and Properties
DOI: 10.17277/amt.2018.04.pp.054-068

54

 

Ponomarev S.V., Bulanov E.V., Bulanova V.O., Divin A.G., Mozgova G.V., Al-Busaidi S.S.S. Optimization of the Heat Pulse Duration, Basic Construction Size of the Device and Conditions of Experimental Data Processing when Measuring Thermophysical Properties of Heat Insulating Materials by Pulse Plane Heat Source Method to Improve the Testing Laboratory Management System
DOI: 10.17277/amt.2018.04.pp.069-081

69

Abstracts in Russian

82

 

Issue 3, 2018

M.I. Alymov, A.A. Shtertser, V.N. Sanin, O.O. Likhanova. Production of New Materials Using Explosion Energy and Self-Propagating High-Temperature Synthesis

4

Levinsky Yu.V., Alymov M.I. Thermodynamic Scale of Dispersive Capacity of Crystalline Bodies
DOI: 10.17277/amt.2018.03.pp.007-009

7

Miloserdov P.A., Gorshkov V.A., Yukhvid V.I., Miloserdova O.M. SHS Metallurgy of Titanium–Chromium Carbide from CaCrO4/TiO2/Al/C System
DOI: 10.17277/amt.2018.03.pp.010-012 

10

Deribas A.A., Shtertser A.A., Zubkov E.E. Explosive Hardening and Its Application in Production of Railroad Switch Frogs
DOI: 10.17277/amt.2018.03.pp.013-016

13

Efremov V.P., Utkin А.V. Destruction of Silica Fiber Materials under Shock Wave and Radiation Loadings
DOI: 10.17277/amt.2018.03.pp.017-021

17

Zlobin B., Kiselev V., Shtertser A., Plastinin A. The Pecularities of Wave Formation at Explosive Welding Via thin Interlayer
DOI: 10.17277/amt.2018.03.pp.022-025

22

Smirnov K.L., Grigoryev E.G., Nefedova E.V. β-SiAlON-Based Ceramic Composites from Combustion-Synthesized Raw Materials by Spark Plasma Sintering
DOI: 10.17277/amt.2018.03.pp.026-027

26

Barinova T.V., Barinov V.Yu., Kovalev I.D., Sachkova N.V. The SHS of Y2Ti2O7-Based Pyrochlore Ceramics
DOI: 10.17277/amt.2018.03.pp.029-036

29

Knyazeva A.G. Basic Models of Volume Synthesis of Ti-Based Composites
DOI: 10.17277/amt.2018.03.pp.037-041

37

 

Efremov V.P., Zakatilova E.I. Solid State Phase Transition of Nanodiamond upon Heating and Irradiation
DOI: 10.17277/amt.2018.03.pp.042-044

42

Dolgoborodov A.Yu., Yankovsky B.D., Kirilenko V.G., Streletsky A.N., Ananyev S.Yu., Kolbanev I.V., Vorobyeva G.A., Shevchenko A.A. Initiation and Combustion of Mechanoactivated Mixtures of Aluminum and Copper Oxide
DOI: 10.17277/amt.2018.03.pp.045-048

45

 

Tolchkov Yu.N., Mikhaleva Z.A., Tkachev A.G., Artamonova O.V., Kashirin M.A., Auad M.S. The Effect of a Carbon Nanotubes-Based Modifier on the Formation of the Cement Stone Structure
DOI: 10.17277/amt.2018.03.pp.049-056

49

Tarov D.V., Dyachkova T.P., Tugolukov E.N., Shubin I.N., Tarov V.P. Ensuring a Temperature Conditions in a Reactor for Functionalization of Carbon Nanotubes
DOI: 10.17277/amt.2018.03.pp.057-062

57

Zhigachev Al.O., Golovin Yu.I., Klyachko N.L. A New Physical Method of Localization of Nanomechanical Action of Magnetic Nanoparticles Controlled by Low-Frequency Magnetic Field on Mechanically Sensitive Biochemical Systems
DOI: 10.17277/amt.2018.03.pp.063-069

63

 

Yartsev V.P., Nikolyukin A.N., Pluzhnikova T.M. Assessment and Modeling of Bond Strength of Corroded Reinforcement in Concrete Structures
DOI: 10.17277/amt.2018.03.pp.070-082

70

Abstracts in Russian

83

 

Issue 2, 2018

Golovin Yu.I., Korenkov V.V., Razlivalova S.S. The Effect of Low-Amplitude Oscillations of the Load on the Local Stiffness of Materials in Loaded Nanocontacts Detected by Methods of Dynamic Nanoindentation
DOI: 10.17277/amt.2018.02.pp003-008

3

Tikhomirov S.G., Karmanova O.V., Podvalny S.L., Khvostov A.A., Karmanov A.V. Research into Kinetics of Radiation Destruction of Elastomers
DOI: 10.17277/amt.2018.02.pp009-017

9

Dyachkova T.P., Rukhov A.V., Tkachev A.G., Tugolukov E.N. Functionalization of Carbon Nanotubes: Methods, Mechanisms and Technological Realization
DOI: 10.17277/amt.2018.02.pp018-041

18

Vigdorovich V.I., Tsygankova L.E., Shel N.V., Shel E.Yu. Protective Effectiveness of Superhydrophobic Self-Organizing Surface Films in the Presence of Stimulants of Atmospheric Corrosion of Steel
DOI: 10.17277/amt.2018.02.pp042-051

42

Simonov Yu.V., Ushakov I.V. Methodology of Mechanical Testing for Experimental Detection of Microdestruction Viscosity in Local Regions of Thin Ribbons of Amorpho-Nanocrystalline Material
DOI: 10.17277/amt.2018.02.pp052-059

52

Golovin Yu.I., Korenkov V.V., Razlivalova S.S., Litovka Yu.V. Nanocontact Characteristics of Composite Galvanic Chrome Coatings Detected by Sclerometry and Atomic Force Microscopy
DOI: 10.17277/amt.2018.02.pp060-067

60

Al-Shiblawi K.A., Pershin V.F., Yartsev V.P. Modification of Epoxy Resins: Modern Condition and Prospects. Part  I. Modification of Nanoparticles
DOI: 10.17277/amt.2018.02.pp068-078

68

Abstracts in Russian

79

 

Issue 1, 2018

Foreword to the Issue (M.N. Krasnyansky)

3

Stolin A.M., Baronin G.S., Bazhin P.M., Buznik V.M. Solid-Phase Technologies for Manufacture of Products from Polytetrafluoroethylene
DOI: 10.17277/amt.2018.01.pp004-013

4

Pilko V.V., Komarov F.F. Structure and Tribomechanical Properties of TiZrSiN Nanostructured Thin Films Deposited by Reactive Magnetron Sputtering
DOI: 10.17277/amt.2018.01.pp014-021

14

Kheifetz M.L. From Information and Additive Technologies to Self-Reproduction of Machines and Organisms
DOI: 10.17277/amt.2018.01.pp022-035

22

Sanin V.N., Borch V.N., Andreev D.E., Ikornikov D.M., Yukhvid V.I., Zhuk S.Ya., Sachkova N.V., Kovalyov D.Yu., Lapidus A.L., Eliseev O.L., Kazantsev R.V. CO-Based SHS-Catalysts for the Fisher–Tropsch Process
DOI: 10.17277/amt.2018.01.pp036-040

36

Khina B.B. Thermodynamic Models of Condensed Phases and Their Application in Materials Science
DOI: 10.17277/amt.2018.01.pp041-046

41

Ustinova T.P., Panova L.G., Kadykova Yu.A., Levkina N.L. The Structure Formation and Evaluation of the Properties of Polymermatric Composites Based on Sub-Microdimensional Fillers
DOI: 10.17277/amt.2018.01.pp047-051

47

Nyein Chan Kyaw, Sheshin E.P., Win L.N., Lwin Z.Y., Aung H.W. A Review of Power Source for Nanostructured Carbon Materials in Cathodoluminescence Light Sources
DOI: 10.17277/amt.2018.01.pp052-057

52

Posternak N.V., Ferapontov Yu.A., Ferapontova L.L., Akulinin E.I., Dvoretsky S.I. Composite Sorption-Active Materials Based on Zeolite and Ethylene Fluorine Derivatives. Part II.  Preparation of Composite Sorption-Active Materials, Investigation of Their Physicochemical Properties and Selection of Optimal Synthesis Conditions
DOI: 10.17277/amt.2018.01.pp058-068

58 

Borshchev V.Ya., Sukhorukova T.A. Current Status and Development of Production Technologies of Multicomponent Mixtures of Bulk Materials in Large Volumes
DOI: 10.17277/amt.2018.01.pp069-077

69 

Abstracts in Russian

78

 

Issue 4, 2017

Sanin V.N., Likhanova O.O. The 50th Anniversary of the Invention of Self-Propagating High-Temperature Synthesis

3

Stolin A.M., Alimov M.I., Bazhin P.M. The XV All-Russian (with International Participation) School Seminar on Structural Macrokinetics for Young Researchers in Honour of Academician A.G. Merzhanov

5

Shustov V.S., Rubtsov N.M., Alymov M.I., Ankudinov A.B., Evstratov E.V., Zelensky V.A. A Porous Material Based on Cobalt and Nickel Powders
DOI: 10.17277/amt.2017.04.pp007-009

7

Valitov V.A., Ganeev A.A., Utyashev F.Z. The Effect of Thermomechanical Treatment Conditions on the Structure and Properties of the Granulated EP741NP Nickel Alloy
DOI: 10.17277/amt.2017.04.pp010-017

10

Konstantinov A.S., Bazhin P.M., Stolin A.M., Chizhikov A.P. The Specifics of Synthesis and Structure of Titanium Carbide Powder Produced by the SHS-Grinding Method in a Closed Reactor
DOI: 10.17277/amt.2017.04.pp018-021

18

Seplyarsky B.S., Kochetkov R.A., Lisina T.G., Abzalov N.I. The Effect of Synthesis Conditions on Phase Composition and Structure of Combustion Products of Nickel-Bonded Titanium Carbide
DOI: 10.17277/amt.2017.04.pp022-028

22

Posternak N.V., Ferapontov Yu.A., Ferapontova L.L., Akulinin E.I., Dvoretsky S.I. Composite Sorption-Active Materials Based on Zeolite and Ethylene Fluorine Derivatives. Part I. Raw Materials, Production Technology and Research Methodology for Prototypes
DOI: 10.17277/amt.2017.04.pp029-040

29

Savin L.A., Mashkov E.A. Shear Flow of Low-Viscosity Liquids in Elastic Converging Channels
DOI: 10.17277/amt.2017.03.pp041-048

41

Yakovleva E.Y., Shundrina I.K. Chromatographic Adsorbents Based on Fluorinated Polyimides Supported on Diatomite
DOI: 10.17277/amt.2017.04.pp049-055

49 

Nakhman A.D., Rodionov Yu.V. Generalized Solution of the Heat and Mass Transfer Problem
DOI: 10.17277/amt.2017.04.pp056-063

56 

Ponomarev S.V., Divin A.G., Ponomareva E.S. Mathematical Models of Temperature Fields of Potato Tubers with Surface and Internal Defects
DOI: 10.17277/amt.2017.04.pp065-075

65 

Abstracts in Russian

76

 

Issue 3, 2017

Valitov V.A. Deformation in Superplasticity Regime – an Effective Method of Producing Components from Hetero- Phase Nickel-Based Alloys with Functional-Gradient Properties
DOI: 10.17277/amt.2017.03.pp003-013

3

Milyaev I.M., Alymov M.I., Yusupov V.S., Zelensky V.A., Milyaev A.I., Ankudinov A.B. Hard Magnetic Properties of Mn-Al-C Alloys Doped with Titanium and Iron 
DOI: 10.17277/amt.2017.03.pp014-016

14

Stelmakh L.S., Stolin A.M. Computer Modelling of New Experimental Schemes of SHS-Extrusion
DOI: 10.17277/amt.2017.03.pp017-023

17

Sanin V.N., Ikornikov D.M., Andreev D.E., Sachkova N.V., Yukhvid V.I. Synthesis of Cast High Entropy Alloys with a Low Specific Gravity by Centrifugal Metallothermic SHS-Methods
DOI: 10.17277/amt.2017.03.pp024-033

24

Kulnitskiy B.A., Blank V.D. Iron Carbide Formation inside Carbon Nanotubes
DOI: 10.17277/amt.2017.03.pp034-039

34

Bazhin P.M., Stolin A.M., Konstantinov A.S. The Impact of Mechanical Effects on Granulometric Composition of TiB2 – Based Materials
DOI: 10.17277/amt.2017.03.pp040-043

40

Pervukhina O. L., Denisov I.V. The Specifics of Producing Steel to Brass Bimetal Using Explosion Welding
DOI: 10.17277/amt.2017.03.pp044-046

44

Khachaturova T.A. Volt-Ampere Characteristics of Tunnel Junctions from Ferromagnetic Materials
DOI: 10.17277/amt.2017.03.pp047-050

47

Akulinin  E.I., Ishin A.A., Skvortsov S.A., Dvoretsky D.S., Dvoretsky S.I.Optimization  of  Adsorption  Processes with Cyclic Variable Pressure in Gas Mixture Separation
DOI: 10.17277/amt.2017.03.pp051-060

 51 

Vigdorovich V.I., Zhukovskaya Т.V., Tsygankova L.E., Esina M.N., Shel N.V. Analytical Evaluation of the Amount of Extracted Quantities of Sorbate and Sorbent Dynamic Capacity under Sorption Purification of Flow Solutions
DOI: 10.17277/amt.2017.03.pp061-066

 61 

Yartsev V.P. Cement and Gypsum Concretes with Construction Aggregates and Industrial Wastes
DOI: 10.17277/amt.2017.03.pp067-076

 67 

Abstracts in Russian

77

 

Issue 2, 2017

Muromtsev D.Yu. Main Trends in the Development of R&D and Higher Qualification Faculty Training Department at Tambov State Technical University

3

Alymov M.I., Milyaev I.M., Yusupov V.S., Milyaev A.I. Nanocrystalline Hard Magnetic Materials
DOI: 10.17277/amt.2017.02.pp010-018

10

Komarov F.F., Tkachev A.G., Milchanin O.V., Parfimovich I.D., Grinchenko M.V., Parkhomenko I.N., Bychenok D.S. A Composite Based On Epoxy Polymer and Carbon Nanotubes: Structure, Optical Properties and Interaction with Microwave Radiation
DOI: 10.17277/amt.2017.02.pp019-025

19

Podestà L., Sforza G., Churikov A., Divin A., Filatova A. Wireless Sensors-Based Network to Measure Different Power Quality Disturbances
DOI: 10.17277/amt.2017.02.pp026-037

26

Akulinin E.I., Ishin A.A., Skvortsov S.A., Dvoretsky D.S., Dvoretsky S.I. Mathematical Modeling of Hydrogen Production Process by Pressure Swing Adsorption Method
DOI: 10.17277/amt.2017.02.pp038-049

38

Mukhin V.M., Burakov A.Ye., Burakova I.V. Active Carbon as Nanoporous Material for Solving Environmental Problems
DOI: 10.17277/amt.2017.02.pp050-056

50

Vigdorovich V.I., Kolenchin N.V. The Effect of Ozonizing Sulfuric Acid Electrolyte with or without Ultrasonic Field on Anodizing some Aluminum Alloys
DOI: 10.17277/amt.2017.02.pp057-066

57

Altunin K.A., Sokolov M.V. Development of Information Support for Intelligent CAD of Cutting Processes
DOI: 10.17277/amt.2017.02.pp067-077

67

Abstracts in Russian

78

  

Issue 1, 2017

Krasnyansky M.N. Foreword to the Issue

3

Stolin A.M., Alymov M.I. Report on the XIV All-Russian School on Structural Macrokinetics for Young Scientists

4

Sanin V.N., Likhanova O.O. Solid Basis for “Solid Flame”

6

Acurio E., García-Cruz L., Montiel V., Iniesta J. Preparation of Poly(Vinyl) Alcohol/Chitosan Hybrid Membranes Doped with Graphene Nanosheets
DOI: 10.17277/amt.2017.01.pp009-019

9

Dimitri R., Li Y., Fantuzzi Ni., Tornabene F. Innovative Modeling of the Crack Path and Stress Intensity Factor for Arbitrary Shaft Configurations
DOI: 10.17277/amt.2017.01.pp020-035

20

Khina B.B., Goranskiy G.G. Thermodynamics of Multicomponent Amorphous Alloys: Theories and Experiment Comparison
DOI: 10.17277/amt.2017.01.pp036-043

36

Kulikov G.M., Carrera E., Plotnikova S.V. Hybrid-Mixed Quadrilateral Element for Laminated Plates Composed of Functionally Graded Materials
DOI: 10.17277/amt.2017.01.pp044-055

44

Malygin  E.N.,  Karpushkin  S.V.,  Krasnyansky  M.N.,  Glebov  A.O.,  Karpov  S.V. Mathematical Modeling of Nonstationary Heat Processes of Thermal Treatment of Metal Products with Enhanced Hardness
DOI: 10.17277/amt.2017.01.pp056-064

56

Tugolukov E.N., Egorov S.Ya., Egorov E.S. Information Systems and Technology of Using Substance Properties in Calculations
DOI: 10.17277/amt.2017.01.pp065-070

65

Nemtinov V.А., Sergeyev V.S., Nemtinova Yu.V., Mokrozub V.G. Technology and Equipment for Friction Welding of Thin-Walled Parts Made of Mineral-Filled Polypropylene
DOI: 10.17277/amt.2017.01.pp071-075

71

Abstracts in Russian

77

  

Issue 4, 2016

By the Russian Federation Government Decree No. 2088-p of October 5, 2016, Moscow

3

Abstract-Presentation of the Work “Development of the Scientific Fundamentals and Domestic Production of Carbon Nanostructures of «Taunit» Series – Modifiers of Special-Purpose Structural and Functional Materials”

3

Stolin A.M., Alymov M.I. The History of the Academic Institute ISMAN
DOI: 10.17277/amt.2016.04.pp.006-010

6

Morgunov R.B., Talantsev A.D., Kunitsyna E.I., Piskorskii V.P., Kablov E.N., Ospennikova O.G. A Giant Increase in the Coercive Force of (PrDy)(CoFe)B Microparticles Ensemble in the Polymer Matrix
DOI: 10.17277/amt.2016.04.pp.011-015

11

Scherbakov V.A., Gryadunov A.N., Alymov M.I. Synthesis and Characteristics of B4C-TiB2 Composite
DOI: 10.17277/amt.2016.04.pp.016-021

16

Yukhvid V. I. SHS-Metallurgy: Fundamental and Applied Research
DOI: 10.17277/amt.2016.04.pp.023-034

23

Plewa A., Belyaev P.S., Andrianov K.A., Zubkov A.F., Frolov V.A. The Effect of Modifying Additives on the Consistency and Properties of Bitumen Binders
DOI: 10.17277/amt.2016.04.pp.035-040

35

Vigdorovich V.I., Tsygankova L.E., Shel N.V., Balybin D.V., Kryilskiy D.V. Control of Kinetic Parameters and Rate-Determining Step Nature of Hydrogen Evolution Reaction on Iron
DOI: 10.17277/amt.2016.04.pp.041-045

41

Selivanov Yu.T.  Modeling of Classification Process in a Continuous Trommel Screen
DOI: 10.17277/amt.2016.04.pp.046-052

46

Kochetov V.I., Baronin G.S. Methods of Calculating the Moulding Instrument Profile for Creating the Set Molecular Orientation in the Finished Product Made of Ultra High Molecular Weight Polyethylene
DOI: 10.17277/amt.2016.04.pp.053-060

53

Abonosimov O.A. A Study on Kinetic Characteristics of Reverse Osmosis Separation of Wastewater Containing Heavy Metals Ions
DOI: 10.17277/amt.2016.04.pp.061-070

 61

Divin A.G., Ponomarev S.V., Liubimova D.A. Experimental Determination of the Thermophysical Properties of Polygraphene-Based Pastes
DOI: 10.17277/amt.2016.02.pp.071-076

71

 

  

Abstracts in Russian

77

 

Issue 3, 2016

Tkachev A.G. Innovation Nanoindustry Cluster of Tambov State Technical University

3

Golovin. Yu.I. Institute “Nanotechnology and nanomaterials” at G. R. Derzhavin Tambov State University

7

Matsumoto K., Yamato H., Akita K., Fujimura T. Effect of Nanodiamond on Removal of Cesium from Soil by Potassium Ferrocyanide
DOI: 10.17277/amt.2016.03.pp.009-013

9

Kheifets M.L. Self-Organization of Structure Formation Processes in Intense Treatment and Operation of Materials
DOI: 10.17277/amt.2016.03.pp.014-020

14

Valitov V.A. Nickel Alloys Structure and Properties Control by Deformation-Thermal Treatment in Solid State
DOI: 10.17277/amt.2016.03.pp.021-031

21

Golovin Yu.I. The Nature and Multiscale Techniques for Characterizatoin of Mechanical Properties: from Nanostructured Materials to Single Macromolecules. Part III. Nanoindentation and Atomic Mechanisms of Local Plastic Deformation
DOI: 10.17277/amt.2016.03.pp.032-047

32

Vigdorovich  V.I., Tsygankova L.E., Tanygina E.D., Tanygin A.Yu., Shel N.V. New Conservation Materials on the Base of Colza Oil for the Steel Protection against Atmospheric Corrosion
DOI: 10.17277/amt.2016.03.pp.048-052

48

Shchegolkov A.V., Galunin E.V., Shchegolkov A.V. (Jr.), Zyablova A.M., Memetov N.R., Korotkov S.V. The Study of  Operating  Parameters  of a Graphene Electrode-Based Supercapacitor by the Voltmeter-Ammeter Method
DOI: 10.17277/amt.2016.03.pp.053-060

53

Lavrenchenko A.A., Lazarev D.S., Khorokhorina I.V., Golovin Yu.M., Polikarpov V.M., Lazarev S.I. A Study of Some Physical Problems of Water Condition and Mass Transfer in Cellulose Acetate and Dynamic Membranes
DOI: 10.17277/amt.2016.03.pp.061-068

61

Promtov  M.A,  Pigarev S. Technology for Improving Water-Fuel Oil Emulsions Properties Using Polycarboxylic Acids
DOI: 10.17277/amt.2016.02.pp.069-080

69
 

 

Abstracts in Russian

81

 

Issue 2, 2016

 

Shtarbakov V., Stavrev D. Microstructure of Laser Welded-on Layers of 32CrMoV12-28 Steel with Maraging Alloy in Ageing
DOI: 10.17277/amt.2016.02.pp.003-007

3

Khina B.B., Goranskiy G.G. Thermodynamic Properties of Multicomponent Amorphous Alloys in Systems Fe-Si-B-Ni and Fe-Si-B-Ni-Co-Cr-Mo
DOI: 10.17277/amt.2016.02.pp.008-015

8

Montaev S.A., Loganina V.I., Adilova N.B., Shakeshev B.T. Lime Mortars Modified by Complex Silica Sol Additives
DOI: 10.17277/amt.2016.02.pp.016-022

16

Golovin Yu.I. The Nature and Multiscale Techniques for Characterization of Mechanical Properties: from Nanostructured Materials to Single Macromolecules. Part II.Strength of low-dimensional materials
DOI: 10.17277/amt.2016.02.pp.023-034

23

Simagin D.N., Gravin A.A., Kulakov V.Yu., Litovka Yu.V., Dyakov E.A. The Effect of TAUNIT Carbon Nanotubes on the Properties of Electroplating and Anodic Oxide Coatings
DOI: 10.17277/amt.2016.02.pp.035-042

35

Smolikhina P.M., Muratova E.I., Dvoretsky S.I. The Study of Structure Formation Processes in the Confectionery Mass
DOI: 10.17277/amt.2016.02.pp.043-047

43

Tugolukov E.N., Galunin E.V., Tarov A.V., Memetov N.R., Tkachev A.G. Mathematical Modeling of Ammonium Persulfate Granules Dissolution in Sulfuric Acid
DOI: 10.17277/amt.2016.02.pp.048-052

48

Dmitriev O.S., Zhyvenkova A.A., Dmitriev A.O. Thermo-Chemical Analysis of the Cure Process of Thick Polymer Composite Structures for Industrial Applications
DOI: 10.17277/amt.2016.02.pp.053-060

53

Erofeev A.V.,Yartsev V.P. Development of Durable Exterior Insulation Finishing Systems Based on Composite Timber Technology for Building Facades
DOI: 10.17277/amt.2016.02.pp.061-068

61

Popov V.Yu., Khorokhorina I.V., Golovin Yu.M., Polikarpov V.M., Lazarev S.I. An X-Ray Scattering Study of MGA-95 and ESPA Composite Membranes
DOI: 10.17277/amt.2016.02.pp.069-076

69
 

 

Abstracts in Russian

77

 

Issue 1, 2016

 

Editor’s Note (Mikhail I. Alymov Editor-in-Chief and Mikhail N. Krasnyansky Chair of Editorial Board)

3

Bazhin P. M., Stolin A. M., Chizhikov A. P., Konstantinov A. S., Mikheyev M. V. The Effect of Mechanical Treatment on the Phase Formation of the Synthesized Material Based on Molybdenum Disilicide 
DOI: 10.17277/amt.2016.01.pp.004-008

4

Sukhorukov R. Yu., Sidorov A. A., Alimov A. I., Nagimov M. I., Utyashev F. Z. Mathematical and Physical Modeling of the Rolling Process of Tapered Shafts for Aviation Purposes 
DOI: 10.17277/amt.2016.01.pp.009-016

9

Safarov M. M., Davlatov N. B., Gulomov M. M., Zaripova M. A. Effect of Fullerenes C60,C70 and CNTs on the Thermophysical Properties of Nitrogen- and Oxygen-Containing Liquids (Rocket Fuel) 
DOI: 10.17277/amt.2016.01.pp.017-028

17

Golovin Yu. I. The Nature and Multiscale Techniques for Characterizatoin of Mechanical Properties: from Nanostructured Materials to Single Macromolecules. Part I. Theoretical Strength. Size Effects 
DOI: 10.17277/amt.2016.01.pp.029-041

29

Romantsova I. V., Burakov A. E., Kucherova A. E., Neskoromnaya E.A., Babkin A. V.,Tkachev A. G. Liquid-Phase Adsorption of an Organic Dye on Non-Modified and Nanomodified Activated Carbons: Equilibrium and Kinetic Analysis 
DOI: 10.17277/amt.2016.01.pp.042-048

42

Gladysheva T. V., Gladyshev N. F., Dvoretsky S. I. Advanced Composite Material for Air Regeneration Systems of Individual and Collective Protection 
DOI: 10.17277/amt.2016.01.pp.049-055

49

Poluektov V. L., Khudyakov V. V., Baronin G. S., Buznik V. M. Features of Combined Solid-Phase Extrusion Technology, Structure and PropertyFormation of Fluoropolymer-Based Nanocomposites 
DOI: 10.17277/amt.2016.01.pp.056-060

56

Kulikov G. M., Mamontov A. A., Plotnikova S. V., Kulikov M. G., Mamontov S. A. Sampling Surfaces Formulation for Functionally Graded and Laminated Composite Shells 
DOI: 10.17277/amt.2016.01.pp.061-066

61

Lyubimova D. A., Ponomarev S. V., Divin A. G. Measuringthe Thermal Diffusivity of Multi-Layered Graphene Nanoplatelets (GNPs) by a Periodic Heating Method 
DOI: 10.17277/amt.2016.01.pp.067-074

67
 

 

Abstracts in Russian

75

Publication Ethics and Publication Malpractice Statement

79

Related Articles

История журнала

Цели и задачи

Архивирование